2013

Zoom Window Zooms to display an area specified by a rectangular window.
Zoom Original Restores the original view.
Zoom Extents Zooms to display the drawing extents.
See also:
Pan or Zoom a View
-PAN
Moves the view planar to the screen by specifying a distance and direction
the view should be moved in.
List of Prompts
The following prompts are displayed.
Specify base point or displacement: Specify a point
You can specify a single point, indicating the relative displacement of the
drawing with respect to the current location, or (more commonly) you can
specify two points, in which case the displacement is computed from the first
point to the second point.
If you press Enter, the drawing is moved by the amount you specified in the
Specify Base Point or Displacement prompt. For example, if you specify 2,2
at the first prompt and press Enter at the second prompt, the drawing is moved
2 units in the X direction and 2 units in the Y direction. If you specify a point
at the Specify Second Point prompt, the location of the first point is moved
to the location of the second point.
You cannot use PAN transparently during
VPOINT (page 1149) or DVIEW (page
389), or while another
ZOOM (page 1188), PAN, or VIEW (page 1139) command is
in progress.
P Commands | 769