2013

Table Of Contents

Limits Specifies whether to reset the grid limits to the drawing extents after

a title block has been inserted.

Units Specifies whether the sizes and point locations are translated to inch

or millimeter paper units.

Xref Specifies whether the title block is inserted or externally referenced.

Title Block

Prepares paper space, orients the drawing by setting the origin, and creates a

drawing border and a title block.

Delete Objects

Deletes objects from paper space.

Origin

Relocates the origin point for this sheet.

Undo

Reverses operations performed in the current MVSETUP session.

Insert

Displays title block options.

Title Block to Load Inserts a border and a title block. Entering 0 or pressing

Enter inserts no border. Entering 1 through 13 creates a standard border of

the appropriate size. The list includes ANSI and DIN/ISO standard sheets.

Add Adds title block options to the list. Selecting this option prompts you to

enter the title block description to be displayed in the list and the name of a

drawing to insert.

A line similar to the following example is added after the last entry in the

mvsetup.dfs default file:

A/E (24 x 18in),arch-b.dwg,(1.12 0.99 0.00),(18.63 17.02 0.00),in

The last field of the line specifies whether the title block has been created in

inches or in millimeters. The units field allows title blocks created in either

unit system to be changed by setting the unit type using the Options option.

You can also add title blocks that have variable attributes.

Delete Removes entries from the list.

Redisplay Redisplays the list of title block options.

Undo

Reverses operations performed in the current MVSETUP session.