2013

The viewing angle for each quadrant is set as shown in the table.
ViewQuadrant
Top (XY plane of UCS)Upper-left
SE isometric viewUpper-right
Front (XZ plane of UCS)Lower-left
Right side (YZ plane of UCS)Lower-right
Entering 3 defines a matrix of viewports along the X and Y axes. Specifying
points at the next two prompts defines the rectangular area of the drawing
that contains the viewport configuration. If you have inserted a title block,
the Specify First Corner prompt also includes an option for selecting a default
area.
If you enter more than one viewport in each direction, the following prompts
are displayed:
Specify distance between viewports in X direction <0.0>: Specify a distance
Specify distance between viewports in Y direction <0.0>: Specify a distance
The array of viewports is inserted into the defined area.
Redisplay Redisplays the list of viewport layout options.
Undo
Reverses operations performed in the current MVSETUP session.
Scale Viewports
Adjusts the zoom scale factor of the objects displayed in the viewports. The
zoom scale factor is a ratio between the scale of the border in paper space and
the scale of the drawing objects displayed in the viewports.
Interactively Selects one viewport at a time and displays the following prompts
for each:
For example, for an engineering drawing at a scale of 1:4, or quarter scale,
enter 1 for paper space units and 4 for model space units.
Uniform Sets the same scale factor for all viewports.
Options
Sets the MVSETUP preferences before you change your drawing.
Layer Specifies a layer on which to insert the title block.
M Commands | 709