2013

Diameter (torus) Sets the diameter of the mesh torus, measured from the
center point of the torus to the center point of the tube.

Tube radius (page 632)

2Point (tube radius) (page 632)

Diameter (tube) (page 632)
Tube radius Sets the radius of the profile that is swept around the mesh torus
path.
2Point (tube radius) Sets the radius of the profile of the tube based on the
distance between two points that you specify:
 First point. Sets the first point of a two-point distance.
 Second point. Sets the second point of a two-point distance.
Tube diameter Sets the diameter of the profile of the mesh torus tube.
Settings
Modifies the smoothness and tessellation values for the new mesh object.
Level of smoothness Sets the initial degree of smoothness, or roundness, to
be applied to the mesh. Enter 0 to eliminate smoothness. Enter a positive
integer up to 4 for increased degrees of smoothness. The value is retained for
the current drawing session.
This smoothness value is limited by the value of
SMOOTHMESHMAXLEV
(page 1481).
Tessellation Enter a tessellation values (the number of faces) for each
dimension of a mesh primitive option.
See also:
Create 3D Mesh Primitives
MESHCAP
Creates a mesh face that connects open edges.
Access Methods
Menu: Modify  Mesh Editing  Close Hole
632 | Chapter 2 Commands