2013

3P (three points) Sets the location, size, and rotation of the mesh torus by
specifying three points. The path of the tube passes through the specified
points:
 First point. Sets the first point on the path of the tube.
 Second point. Sets the second point on the path of the tube.
 Third point. Sets the third point on the path of the tube.
Tube radius (page 632)

2Point (tube radius) (page 632)

Diameter (tube) (page 632)
2P (torus diameter) Sets the diameter of the mesh torus by specifying two
points. The diameter is calculated from the center point of the torus to the
center point of the tube.
 First endpoint of diameter. Sets the first point used to specify the torus
diameter distance.
 Second endpoint of diameter. Sets the second point used to specify
the torus diameter distance.

Tube radius (page 632)

2Point (tube radius) (page 632)

Diameter (tube) (page 632)
Ttr (tangent, tangent, radius) Defines a mesh torus radius that is tangent to
two objects. The specified tangent points are projected into the current UCS:
 Point on object for first tangent. Sets a point on an object to serve
as the first tangent point.
 Point on object for second tangent. Sets a point on an object to serve
as the second tangent point.
 Radius of circle. Sets the radius of the mesh torus.
If the specified criteria can produce multiple results, the closest tangent points
are used.
Radius (torus) Sets the radius of the mesh torus, measured from the center
point of the torus to the center point of the tube.

Tube radius (page 632)

2Point (tube radius) (page 632)

Diameter (tube) (page 632)
M Commands | 631