2013

Height Sets the height of the mesh cylinder along an axis that is perpendicular
to the plane of the base.
Axis endpoint Sets the location of the top face of the cylinder. The orientation
of the axis endpoint can be anywhere in 3D space.
Elliptical Specifies an elliptical base for the mesh cylinder.
 Endpoint of first axis. Sets the start point for the first axis of the mesh
cone base.
 Other endpoint of first axis. Sets the first axis endpoint.
 Endpoint of second axis. Sets the second axis endpoint.
 Center. Specifies the method for creating an elliptical mesh cone base
that starts with the center point of the base.
 Center point. Sets the center of the mesh cone base.
 Distance to first axis. Sets the radius of the first axis.
 Endpoint of second axis. Sets the endpoint of the second axis.
Pyramid
Creates a 3D mesh pyramid.
Specify the diameter and height.
Center point of base Sets the center point of the mesh pyramid base.

Base radius (page 627)

Inscribed (page 627)
Edge Sets the length of the one edge of the mesh pyramid base, as indicated
by two points that you specify:
 First endpoint of edge. Sets the first location of the edge of the mesh
pyramid.
626 | Chapter 2 Commands