2013

2P (diameter) Sets the diameter of the mesh cylinder base by specifying two
points:
 First endpoint of diameter. Sets the first point on the diameter of the
mesh cylinder base.
 Second endpoint of diameter. Sets the second point on the diameter
of the mesh cylinder base.

Height (page 626)

2Point (height) (page 625)

Axis endpoint (page 626)
2Point (height) Defines the height of the mesh cylinder by specifying the
distance between two points:
 First point. Sets the first point of a two-point distance.
 Second point. Sets the second point of a two-point distance.
Ttr (tangent, tangent, radius) Defines the base of the mesh cylinder with a
specified radius that is tangent to two objects. If the specified criteria can
produce multiple results, the closest tangent points are used.
 Point on object for first tangent. Sets a point on an object to serve
as the first tangent point.
 Point on object for second tangent. Sets a point on an object to serve
as the second tangent point.
 Radius of circle. Sets the radius of the mesh cylinder base.
Height (page 626)

2Point (height) (page 625)

Axis endpoint (page 626)
Base Radius Sets the radius of the mesh cylinder base.

Height (page 626)

2Point (height) (page 625)

Axis endpoint (page 626)
Diameter Sets the diameter for the base of the cylinder.

Height (page 626)

2Point (height) (page 625)

Axis endpoint (page 626)
M Commands | 625