2013

List of Options
The following options are displayed.
Move Point Location Reshapes the selected object by moving the base point.
Move Tangent Direction Reshapes the selected object by changing the slope
of the tangent at the base point.
U Tangent Direction Locates the tangent arrow grip on the U axis. Changes
to the tangency are constrained to the UW plane.
V Tangent Direction Locates the tangent arrow grip on the V axis. Changes
to the tangency are constrained to the VW plane.
Normal Tangent Direction Locates the tangent arrow grip on the W axis,
which is normal to the surface at the base point. Changes to the tangency are
constrained to the UW plane.
Set Constraint Sets whether the change in tangency or point location is
constrained to a specific axis or major plane.
 X, Y or Z. Restricts the change to the specified World Coordinate System
(WCS) axis.
 XY, YZ, or XZ. Restricts the change to the specified World Coordinate
System (WCS) plane.
Relocate Base Point Specifies a new base point on the curve or NURBS surface.
Align Gizmo With Reorients the gizmo to align with the WCS or UCS, or
with a selected face or object.
See also:
Modify Splines
Edit NURBS Surfaces
3DFACE
Creates a three-sided or four-sided surface in 3D space.
Access Methods
Menu: Draw  3D Modeling  Meshes  3D Face
30 | Chapter 2 Commands