2013

 Distance in X direction (Delta X)
 Distance in Y direction (Delta Y)
Multiple Points A running total of distance based on existing line segments
and the current rubber-band line is calculated. The total updates as you move
the cursor and displays in the tooltip.
If you enter Arc, Length, or Undo Options for Selecting Polylines (page 618)
display.
Radius
Measures the radius and diameter of a specified arc or circle.
Angle
Measures the angle of a specified arc, circle, line, or vertex.
Arc Measures the angle of an arc.
Circle Measures a specified angle within a circle. The angle updates as you
move the cursor.
Line Measures the angle between two lines.
Vertex Measures the angle of a vertex.
Area
Measures the area and perimeter of an object or defined area.
NOTE MEASUREGEOM cannot calculate the area of a self-intersecting object.
Specify Corner Points Calculates the area and perimeter defined by specified
points.
If you enter Arc, Length, or Undo,
Options for Selecting Polylines (page 618)
display.
Add Area Turns on Add mode and keeps a running total of area as
you define areas. You can use the Add Area option to calculate the
 Individual areas of defined areas and objects
 Individual perimeters of defined areas and objects
 Total area of all defined areas and objects
 Total perimeter of all defined areas and objects
Subtract Area Subtracts a specified area from the total area. The total area and
perimeter displays at the Command prompt and in the tooltip.
Volume
Measures the volume of an object or a defined area.
M Commands | 617