2013

Pressing Enter starts the interference testing of pairs of 3D solids and displays
the
Interference Checking dialog box (page 530).
If you enter -interfere at the Command prompt,
options are displayed (page
532).
List of Prompts
The following prompts are displayed.
First set of objects Specifies a set of objects to be checked. If you do not select
a second set of objects, all objects in this selection set are checked against each
other.

Second set of objects (page 529)

Nested selection (page 529)

Settings (page 529)
Second set of objects Specifies an additional set of objects to be compared
against the first set of objects. If you select the same object twice, the object
is handled as part of the first selection set.

Second set of objects (page 529)

Nested selection (page 529)
 Check first set. Initiates interference checking for only the first selection
set and displays the Interference Checking dialog box.
 Check. Initiates interference checking for both sets of objects and displays
the Interference Checking dialog box.
Nested selection Provides access to individual solid objects that are nested in
blocks and xrefs.
 Select nested objects. Specifies which nested objects to include in the
selection set.
 Exit. Restores normal object selection (not nested).
Settings Displays the Interference Settings dialog box (page 530).
See also:
Check 3D Models for Interferences
I Commands | 529