2013

Summary
You can specify one, two, or three points for the source object. Then, you can
specify one, two, or three points for the destination.
List of Prompts
The following prompts are displayed.
Select objects: Select the objects to align and press Enter
Specify source plane and orientation . . .
The selected object is moved and rotated so that the base points, and the X
and Y axes of the source and destination align in 3D space. 3DALIGN works
with dynamic UCS (DUCS), so you can dynamically drag the selected objects
and align them with the face of a solid object.
Specify base point or [Copy]: Specify a point or enter c to create a copy
The base point of the source object will be moved to the base point of the
destination.
Specify second point or [Continue] <C>: Specify a point on the object’s
X axis, or press Enter to skip forward to specifying destination points
The second point specifies a new X axis direction within a plane parallel to
the XY plane of the current UCS. If you press Enter instead of specifying a
second point, the X and Y axes are assumed to be parallel with the X and Y
axes of the current UCS.
Specify third point or [Continue] <C>: Specify a point on the object’s
positive XY plane, or press Enter to skip forward to specifying destination points
The third point fully specifies the orientation of the X and Y axes of the source
object that will be aligned with the destination plane.
Specify destination plane and orientation . . .
Specify first destination point: Specify a point
This point defines the destination of the base point of the source object.
3D Commands | 19