2013

or
imagename="path name/long file name.bmp"
If you enter a valid image name without a file extension, the program searches
for the file in this order: first, an existing image definition in the drawing,
and second, an image file in the folders in order of the search path. The
program searches for all the image files with the specified name, regardless of
extension, and uses the first name found. If no image name or image file is
found, the message “Image Not Found” is displayed and the prompt is repeated.
To specify a long file name that does not conform to this program's naming
rules, enter the name as follows:
"imagename=filename"
You can use a dialog box to search for image files but still enter the
imagename=filename convention at the Command prompt. Enter a tilde (~) at
the Enter Image File Name to Attach prompt. If you press Esc after the dialog
box opens, the Enter Image Name prompt is displayed.
See also:
Attach Raster Images
IMAGEADJUST (-IMAGEADJUST)
Controls the image display of the brightness, contrast, and fade values of
images.
Access Methods
Menu: Modify  Object  Image  Adjust
List of Prompts
The following prompts are displayed.
If you select a single image, the default values for Brightness, Contrast, and
Fade are the current property settings of the image. If you select multiple
images, the default values for Brightness, Contrast, and Fade are 50, 50, and
0, respectively.
Contrast Controls the contrast, and indirectly, the fading effect of the image.
The greater the value, the more each pixel is forced to its primary or secondary
color.
I Commands | 513