2013

Enter number of segments around torus circumference <16>: Enter a value
greater than 1 or press Enter
Wedge
Creates a right-angle, wedge-shaped polygon mesh with a sloped face tapering
along the X axis.
Specify corner point of wedge: Specify a point (1)
Specify length of wedge: Specify a distance
Specify width of wedge: Specify a distance
Specify height of wedge: Specify a distance
Specify rotation angle of wedge about the Z axis: Specify an angle
The base point for the rotation is the corner point of the wedge. If you enter
0, the wedge remains orthogonal to the current UCS plane. Enter c to create
a rotated copy of the wedge.
See also:
Create Custom Mesh (Legacy)
3DALIGN
Aligns objects with other objects in 2D and 3D.
Access Methods
Button
Menu: Modify  3D Operations  3D Align
Toolbar: Modeling tool set  Copy tool group  3D Align
18 | Chapter 2 Commands