2013

Enter number of longitudinal segments for surface of dome: Enter a value greater
than 1 or press Enter
Enter number of latitudinal segments for surface of dome <8>: Enter a value
greater than 1 or press Enter
Diameter Defines the dome by its diameter.
Specify diameter of dome: Specify a distance
Enter number of longitudinal segments for surface of dome <16>: Enter a value
greater than 1 or press Enter
Enter number of latitudinal segments for surface of dome <8>: Enter a value
greater than 1 or press Enter
Mesh
Creates a planar mesh whose M and N sizes determine the number of lines
drawn in each direction along the mesh. The M and N directions are similar
to the X and Y axes of an XY plane.
Specify first corner point of mesh: Specify a point (1)
Specify second corner point of mesh: Specify a point (2)
Specify third corner point of mesh: Specify a point (3)
Specify fourth corner point of mesh: Specify a point (4)
Enter mesh size in the M direction: Enter a value between 2 and 256
Enter mesh size in the N direction: Enter a value between 2 and 256
3D Commands | 13