2013

Average/Sum/Count When Formula is selected in Field Names, closes the
Field dialog box temporarily while you specify table cells. The result is
appended to the formula.
Cell When Formula is selected in Field Names, closes the Field dialog box
temporarily while you specify a table cell. The cell address is appended to the
formula.
Precision Specifies precision for fields based on the selected format. Select
Current Precision to use the current setting of the
LUPREC (page 1403) system
variable.
Additional Format Displays the Additional Format dialog box (page 1068).
See also:
Use Fields in Text
FILL
Controls the filling of objects such as hatches, 2D solids, and wide polylines.
List of Prompts
The following prompts are displayed.
Enter mode [
ON (page 435)/OFF (page 435)] <current>: Enter on or
off, or press Enter
On Turns on Fill mode. For the filling of a 3D object to be visible, its extrusion
direction must be parallel to the current viewing direction, and hidden lines
must not be suppressed.
Off Turns off Fill mode. Only the outlines of objects are displayed and plotted.
Changing Fill mode affects existing objects after the drawing is regenerated.
The display of lineweights is not affected by the Fill mode setting.
F Commands | 435