2013

Radius for Top Defines the top of the cone by its radius. A value of 0 produces
a cone. A value greater than 0 produces a truncated cone.
Specify height of cone: Specify a distance
Enter number of segments for surface of cone <16>: Enter a value greater than
1 or press Enter
Diameter for Top Defines the top of the cone by its diameter. A value of 0
produces a cone. A value greater than 0 produces a truncated cone.
Specify diameter for top of cone <0>: Specify a distance or press Enter
Specify height of cone: Specify a distance
Enter number of segments for surface of cone <16>: Enter a value greater than
1 or press Enter
Diameter for Base
Defines the base of the cone by its diameter.
Specify diameter for base of cone: Specify a distance
Specify radius for top of cone or [Diameter] <0>: Specify a distance, enter d, or
press Enter
Radius for Top Defines the top of the cone by its radius. A value of 0 produces
a cone. A value greater than 0 produces a truncated cone.
Specify height of cone: Specify a distance
3D Commands | 11