2013

If the edges of one or more 3D faces are collinear, the program alters the
visibility of each collinear edge.
Display
Selects invisible edges of 3D faces so that you can redisplay them.
All Selects the hidden edges of all 3D faces in the drawing and displays them.
If you want to make the edges of the 3D faces visible once again, use the Edge
option. You must select each edge with your pointing device to display it.
AutoSnap
™
markers and Snaptips are automatically displayed, indicating the
apparent snap locations on each invisible edge.
Select Selects hidden edges of a partially visible 3D face and displays them.
If you want to make the edges of the 3D faces visible once again, use the Edge
option. You must select each edge with your pointing device to display it.
AutoSnap markers and Snaptips are automatically displayed, indicating the
apparent snap locations on each invisible edge.
See also:
Modify 3D Subobjects
EDGESURF
Creates a mesh between four contiguous edges or curves.
Access Methods
Menu: Draw  3D Modeling  Meshes  Edge Mesh
E Commands | 403