2013

Twist
Twists or tilts the view around the line of sight. The twist angle is measured
counterclockwise, with 0 degrees to the right.
Clip
Clips the view, obscuring portions of the drawing that are behind or in front
of the front clipping plane. The front and back clipping planes are invisible
walls that you can position perpendicular to the line of sight between the
camera and target.
Back Obscures objects located behind the back clipping plane.
 Distance from Target. Positions the back clipping plane and turns on
back clipping. A positive distance places the clipping plane between the
target and the camera. A negative distance places it beyond the target. You
can use the slider bar to drag the clipping plane.
 On. Turns on back clipping at the current clipping distance.
 Off. Turns off back clipping.
D Commands | 395