2013

object is parallel to the previous linear object, an alignment path is displayed,
which you can use to create the parallel object.
NOTE Turn off ORTHO mode before using the parallel object snap. Object snap
tracking and polar snap are turned off automatically during a parallel object snap
operation. You must specify the first point of a linear object before using the parallel
object snap.
Select All
Turns on all object snap modes.
Clear All
Turns off all object snap modes.
3D Object Snap Tab (Drafting Settings Dialog Box)
Controls running object snap settings for 3D objects. With running object
snap settings, also called Osnap, you can specify a snap point at an exact
location on an object. When more than one option is selected, the selected
snap modes are applied to return a point closest to the center of the aperture
box. Press TAB to cycle through the options.
D Commands | 379