2013

Follow Dynamic UCS
Changes the grid plane to follow the XY plane of the dynamic UCS. (
GRID-
DISPLAY
(page 1343) system variable)
Polar Tracking Tab (Drafting Settings Dialog Box)
Controls the AutoTrack settings.
Polar Tracking On
Turns polar tracking on and off. You can also turn polar tracking on or off by
pressing F10 or by using the
AUTOSNAP (page 1217) system variable.
Polar Angle Settings
Sets the alignment angles for polar tracking. (
POLARANG (page 1441) system
variable)
Increment Angle
Sets the polar increment angle used to display polar tracking alignment paths.
You can enter any angle, or select a common angle of 90, 45, 30, 22.5, 18, 15,
10, or 5 degrees from the list. (
POLARANG (page 1441) system variable)
D Commands | 373