2013

Forces the X and Y spacing to the same values for snap spacing and for grid
spacing. The snap spacing intervals can be different from the grid spacing
intervals.
Polar Spacing
Controls the PolarSnap
™
increment distance.
Polar Distance
Sets the snap increment distance when PolarSnap is selected under Snap Type
& Style. If this value is 0, the PolarSnap distance assumes the value for Snap
X Spacing. The Polar Distance setting is used in conjunction with polar tracking
and/or object snap tracking. If neither tracking feature is enabled, the Polar
Distance setting has no effect. (
POLARDIST (page 1441) system variable)
Snap Type
Sets the snap style and snap type.
Grid Snap
Sets the snap type to Grid. When you specify points, the cursor snaps along
vertical or horizontal grid points. (
SNAPTYPE (page 1484) system variable)
Rectangular Snap:
Sets the snap style to standard Rectangular snap mode. When the snap type
is set to Grid snap and Snap mode is on, the cursor snaps to a rectangular snap
grid. (
SNAPSTYL (page 1483) system variable)
Isometric Snap
Sets the snap style to Isometric snap mode. When the snap type is set to Grid
snap and Snap mode is on, the cursor snaps to an isometric snap grid.
(
SNAPSTYL (page 1483) system variable)
PolarSnap
Sets the snap type to Polar. When Snap mode is on and you specify points
with polar tracking turned on, the cursor snaps along polar alignment angles
set on the Polar Tracking tab relative to the starting polar tracking point.
(
SNAPTYPE (page 1484) system variable)
Grid On
Turns the grid on or off. You can also turn grid mode on or off by clicking
Grid on the status bar, by pressing Fn-F7, or by using the GRIDMODE (page
1345) system variable.
Grid Style
Sets the grid style in 2D contexts. You can also set grid style by using the
GRIDSTYLE (page 1345) system variable.
D Commands | 371