2013

and values based on the option or value that you last specified, or based on
the settings of certain system variables.
Typically, the first word of a prompt indicates the type of action you can take.
Most command prompts begin with the wordenter, select, or specify. These
words indicate how you can respond to the prompt.
Terminology in command prompts
You can...If the prompt starts with...
Select objects on the screen using your pointing
device.
Select
Enter text at the command prompt.Enter
Use your pointing device or enter text at the
command prompt to select a point location on
the screen.
Specify
Selecting Options at the Command Prompt
To select one of the options contained within the straight brackets, you can
enter the entire option name or only the capitalized letters, and then press
Enter or Spacebar. To select the default option enclosed in angle brackets (<>),
if available, press Enter or Spacebar.
You can also choose command options from a shortcut menu by right-clicking
in the drawing area while the command is active. The options available at the
command prompt appear in the shortcut menu. For information about how
to enable or disable this shortcut menu, see “Work with Shortcut Menus” in
the User's Guide .
Entering Data at the Command Prompt
Some prompts ask you to enter data, rather than (or as an alternative to)
choosing an option. To do so, enter the text at the command prompt and
press Enter or Spacebar. However, be aware that when the command prompt
requests an object name, Spacebar inserts a space at the command prompt
rather than acting as Enter. This allows for the support of extended symbol
names.
Just as default command options are often provided, prompts may include
default values, enclosed in angle brackets (<>), when data is requested. For
4 | Chapter 1 Introduction