2013

DONUT
Creates a filled circle or a wide ring.
Access Methods
Button
Toolbar: Drafting tool set  Closed Shapes tool group (expanded) 
Donut
Menu: Draw  Donut
Summary
A donut consists of two arc polylines that are joined end-to-end to create a
circular shape. The width of the polylines is determined by the specified inside
and outside diameters. To create solid-filled circles, specify an inside diameter
of zero.
List of Prompts
The following prompts are displayed.
Specify inside diameter of donut <current>: Specify a distance or press
Enter
If you specify an inside diameter of 0, the donut is a filled circle.
Specify outside diameter of donut <current>: Specify a distance or
press Enter
Specify center of donut or <exit>: Specify a point (1) or press Enter
to end the command
D Commands | 363