2013

extension line origin becomes the extension line of the base dimension closest
to the pick point of the selection. When you select a second point, the baseline
dimension is drawn and the Specify a Second Extension Line Origin prompt
is redisplayed. To end the command, press Esc. To select another linear,
ordinate, or angular dimension to use as the basis for the baseline dimension,
press Enter.
Feature Location Uses the endpoint of the base dimension as the endpoint
for the baseline dimension; you are prompted for the next feature location.
When you select a feature location, the baseline dimension is drawn and the
Specify Feature Location prompt is redisplayed. To select another linear,
ordinate, or angular dimension to use as the basis for the baseline dimension,
press Enter.
Undo Undoes the last baseline dimension entered during this command
session.
Select Prompts you to select a linear, ordinate, or angular dimension to use
as the base for the baseline dimension.
See also:
Create Baseline and Continued Dimensions
DIMBREAK
Breaks or restores dimension and extension lines where they cross other objects.
Access Methods
Button
286 | Chapter 2 Commands