2013

Line Selects a line object.
Dimension Line Location Determines where the dimension line is located
on the constrained object.
2Lines
Selects two line objects. The lines are made parallel and the aligned constraint
controls the distance between the two lines.
First Line Select the first line to be constrained.
Second Line to Make Parallel Select the second line to constrain the distance
between the two selected lines.
Dimension Line Location Determines where the dimension line is located
on the constrained object.
See also:
Apply Dimensional Constraints
DCANGULAR
Constrains the angle between line or polyline segments, the angle swept out
by an arc or a polyline arc segment, or the angle between three points on
objects.
Access Methods
Button
Toolbar: Drafting tool set  Parametric tool group  Dimensional
Contraints flyout  Angular
Menu: Parametric  Dimensional Constraints  Angular
Summary
This command is equivalent to the Angular option in
DIMCONSTRAINT (page
289).
When you enter or edit an angle value that is either negative or is greater than
360 degrees, the number entered is stored for the expression (for example,
D Commands | 259