2013

List of Prompts
The following prompts are displayed.
Select objects: Use an object selection method and press Enter when you
finish
Specify base point or [Displacement/mOde/Multiple]
<Displacement>: Specify a base point or enter an option
Specify second point or [Array] <use first point as
displacement>: Specify a second point or enter an option
Displacement
Specifies a relative distance and direction using coordinates.
The two points you specify define a vector that indicates how far from the
original the copied objects are to be placed and in what direction.
If you press Enter at the Specify Second Point prompt, the first point is
interpreted as a relative X,Y,Z displacement. For example, if you specify 2,3
for the base point and press Enter at the next prompt, the objects are copied
2 units in the X direction and 3 units in the Y direction from their current
location.
Mode
Controls whether the command repeats automatically (
COPYMODE (page
1240) system variable).
Single Creates a single copy of selected objects and ends the command.
Multiple Overrides the Single mode setting. The COPY command is set to
repeat automatically for the duration of the command.
Array
Arranges a specified number of copies in a linear array.
236 | Chapter 2 Commands