2013

Enter property to change [Color (page 195)/LAyer (page
195)/
LType (page 195)/ltScale (page 195)/LWeight (page
195)/
Thickness (page 195)/TRansparency (page 196)/Material (page
196)/
Annotative (page 196)]:
NOTE The Plotstyle option is displayed only when you are using named plot styles.
If you select several objects with different values for the property you want
to change, varies is displayed as the current value.
Color
Changes the color of the selected objects.
For example, to change a color to red, enter red or 1. If you enter bylayer,
the object assumes the color of the layer on which it is located. If you enter
byblock, the object inherits the color of the block of which it is a component.
True Color Specifies a true color to be used for the selected object.
Color Book Specifies a color from a loaded color book to be used for the
selected object.
Layer
Changes the layer of the selected objects.
Ltype
Changes the linetype of the selected objects.
If the new linetype is not loaded, the program tries to load it from the standard
linetype library file, acad.lin. If this procedure fails, use
LINETYPE (page 578)
to load the linetype.
Ltscale
Changes the linetype scale factor of the selected objects.
Lweight
Changes the lineweight of the selected objects. Lineweight values are
predefined values. If you enter a value that is not a predefined value, the
closest predefined lineweight is assigned to the selected objects.
Thickness
Changes the Z-direction thickness of 2D objects.
Changing the thickness of a 3D polyline, dimension, or layout viewport object
has no effect.
C Commands | 195