2013

Toolbar: Modeling tool set  Solids - Edit tool group  Chamfer Edge
Menu: Modify  Solid Editing  Chamfer Edges
Summary
You can select more than one edge at a time, as long as they belong to the
same face. Enter a value for the chamfer distance or click and drag the chamfer
grips.
List of Prompts
Select an Edge Selects a single solid or surface edge to chamfer.
Distance 1 Sets the distance of the first chamfer edge from the selected edge.
The default value is 1.
Distance 2 Sets the distance of the second chamfer edge from the selected
edge. The default value is 1.
Loop Chamfers all edges on a single face. For any edge, there are two possible
loops. After selecting a loop edge you are prompted to Accept the current
selection or choose the Next loop.
Expression Enter a formula or equation to specify the chamfer distance with
a mathematical expression. See Constrain a Design with Formulas and
Equations.
See also:
Modify Edges on 3D Objects
Create Chamfers
C Commands | 191