2013

Access Methods
Button
Toolbar: Drafting tool set  Modify tool group  Chamfer
Menu: Modify  Chamfer
Summary
The distances and angles that you specify are applied in the order that you
select the objects.
You can chamfer lines, polylines, rays, and xlines.
You can also chamfer 3D solids and surfaces. If you select a mesh to chamfer,
you can choose to convert it to a solid or surface before completing the
operation.
List of Prompts
The following prompts are displayed.
(TRIM mode) Current chamfer Dist1 = current, Dist2 = current
Select
first line (page 187) or [Undo (page 189)/Polyline (page
189)/
Distance (page 189)/Angle (page 189)/Trim (page 190)/mEthod
(page 190)/Multiple (page 190)/eXpression (page 190)]: Use an
object selection method or enter an option
First Line
Specifies the first of two edges required to define a 2D chamfer, or the edge
of a 3D solid to chamfer.
C Commands | 187