2013

First Point Overrides the original first point with the new point that you
specify.
Specify first break point:
Specify second break point:
The portion of the object is erased between the two points that you specify.
If the second point is not on the object, the nearest point on the object is
selected; therefore, to break off one end of a line, arc, or polyline, specify the
second point beyond the end to be removed.
To split an object in two without erasing a portion, enter the same point for
both the first and second points. You can do this by entering @ to specify the
second point.
Lines, arcs, circles, polylines, ellipses, splines, donuts, and several other object
types can be split into two objects or have one end removed.
The program converts a circle to an arc by removing a piece of the circle
starting counterclockwise from the first to the second point.
You can also break selected objects at a single point with the Break at Point
tool.
Valid objects include lines, open polylines, and arcs. Closed objects such as
circles cannot be broken at a single point.
B Commands | 161