2013

-ATTEDIT
List of Prompts
If you enter -attedit at the Command prompt, the following prompts are
displayed.
Edit attributes one at a time? [
Yes (page 123)/No (page 125)]
<Y>: Enter y or press Enter to edit attributes one at a time, or enter n to edit
attributes globally
The following prompts filter the attributes to be changed based on attribute
tag, current value, or object selection.
Yes
Edits attributes one at a time. Attributes to be edited one at a time must be
visible and parallel to the current UCS.
Attribute values are case sensitive.
The first attribute in the selection set is marked with an X. You can change
any properties of the attribute you select.
Enter an option [Value/Position/Height/Angle/Style/Layer/Color/Next] <N>:
Enter the property to change, or press Enter for the next attribute
If the original attribute was defined with aligned or fit text, the prompt does
not include Angle. The Height option is omitted for aligned text. For each of
the options except Next, ATTEDIT prompts for a new value. The X remains
on the current attribute until you move to the next attribute.
A Commands | 123