2013

VSEDGESMOOTH
Specifies the angle at which crease edges are displayed.
IntegerType:
DrawingSaved in:
1Initial value:
The range is 0 to 180.
NOTE Existing visual styles are not changed when you enter a new value for this
system variable. Any new value entered for this system variable temporarily creates
an unsaved new visual style.
See also:
Control the Display of Edges
VSFACECOLORMODE
Controls how the color of faces is calculated.
IntegerType:
DrawingSaved in:
0Initial value:
Normal: Does not apply a face color modifier0
Monochrome: Displays all faces in the color that is specified in the
VSMONOCOLOR (page 1558) system variable
1
Tint: Uses the color that is specified in the VSMONOCOLOR (page
1558) system variable to shade all faces by changing the hue and sat-
uration values of the color
2
Desaturate: Softens the color by reducing its saturation component
by 30 percent
3
NOTE Existing visual styles are not changed when you enter a new value for this
system variable. Any new value entered for this system variable temporarily creates
an unsaved new visual style.
1550 | Chapter 4 System Variables