2013

VSADRAFTANGLEHIGH
Sets the value at which a model displays as green during draft analysis (
ANA-
LYSISDRAFT
(page 62)).
RealType:
DrawingSaved in:
3Initial value:
Draft angle is the angle in degrees between the surface normal and the UCS
plane. High value is set by this system variable.
Surface is parallel to the UCS with surface normal facing the
opposite direction as the construction plane
-90
Surface is perpendicular to the construction plane0
Surface is parallel to the construction plane with surface normal
facing the same direction as the UCS
90
See also:
ANALYSISOPTIONS (page 63)
ANALYSISOPTIONS - Draft Angle Tab (page 66)
VSADRAFTANGLELOW
Sets the value at which a model displays as blue during draft analysis (
ANA-
LYSISDRAFT
(page 62)).
RealType:
DrawingSaved in:
-3Initial value:
Draft angle is the angle in degrees between the surface normal and the UCS
plane. Low value set by this system variable.
Surface is parallel to the UCS with surface normal facing the
opposite direction as the construction plane.
-90
Surface is perpendicular to the construction plane.0
1542 | Chapter 4 System Variables