2013

UCSFOLLOW
Generates a plan view whenever you change from one UCS to another.
IntegerType:
DrawingSaved in:
0Initial value:
The UCSFOLLOW setting is saved separately for each viewport. If UCSFOLLOW
is on for a particular viewport, a plan view is generated in that viewport
whenever you change coordinate systems.
Once the new UCS has been established, you can use
DVIEW (page 389), PLAN
(page 794), VIEW (page 1139), or VPOINT (page 1149) to change the view of the
drawing. It will change to a plan view again the next time you change
coordinate systems.
UCS does not affect the view0
Any UCS change causes a change to the plan view of the new UCS
in the current viewport
1
The setting of UCSFOLLOW is maintained separately for paper space and
model space and can be accessed in either, but the setting is ignored while in
paper space (it is always treated as if set to 0). Although you can define a
non-world UCS in paper space, the view remains in plan view to the world
coordinate system.
See also:
Overview of the User Coordinate System (UCS)
UCSICON
Displays the UCS icon for the current viewport or layout.
IntegerType:
DrawingSaved in:
3Initial value:
This system variable has the same name as a command. Use the SETVAR
command to access this system variable.
1526 | Chapter 4 System Variables