2013

Justification
Specifies the justification of the attribute text. See
TEXT (page 1078) for a
description of the justification options.
Annotative
Specifies that the attribute is annotative. If the block is annotative, the attribute
will match the orientation of the block. Click the information icon to learn
more about annotative objects.
Text Height
Specifies the height of the attribute text. Enter a value, or choose Height to
specify a height with your pointing device. The height is measured from the
origin to the location you specify. If you select a text style that has fixed height
(anything other than 0.0), or if you select Align in the Justification list, the
Height option is not available.
Text Rotation
Specifies the rotation angle of the attribute text. Enter a value, or choose
Rotation to specify a rotation angle with your pointing device. The rotation
angle is measured from the origin to the location you specify. If you select
Align or Fit in the Justification list, the Rotation option is not available.
Multiline Text Width
Specifies the maximum length of the lines of text in a multiple-line attribute
before wrapping to the next line. A value of 0.000 means that there is no
restriction on the length of a line of text.
Not available for single-line attributes.
Advanced Options
Contains options to set the behavior and insertion position for the attribute.
Attribute Options
Sets options for attribute values associated with a block when you insert the
block in a drawing.
The default values are stored in the
AFLAGS (page 1204) system variable.
Changing the AFLAGS setting affects the default mode for new attribute
definitions and does not affect existing attribute definitions.
Invisible
Specifies that attribute values are not displayed or printed when you insert
the block.
ATTDISP (page 119) overrides Invisible mode.
A Commands | 115