2013

The original surface is not deleted and trimmed areas are applied to the
rebuilt object.
2
The original surface is deleted and trimmed areas are applied to the re-
built object.
3
See also:
CVREBUILD (page 249)
Rebuild NURBS Surfaces and Curves
REBUILDU
Sets the number of grid lines in the U direction when rebuilding a NURBS
surface.
IntegerType:
RegistrySaved in:
6Initial value:
Valid values are 2 to 32767 to increase or decrease the number of grid lines
in the U direction used to rebuild the NURBS surface.
See also:
CVREBUILD (page 249)
Rebuild NURBS Surfaces and Curves
REBUILDV
Sets the number of grid lines in the V direction when rebuilding a NURBS
surface.
IntegerType:
RegistrySaved in:
6Initial value:
Valid values are 2 to 32767 to increase or decrease the number of grid lines
in the V direction used to rebuild the NURBS surface.
1458 | Chapter 4 System Variables