2013

IntegerType:
RegistrySaved in:
3Initial value:
Valid values are 2 to 11.
See also:
CVREBUILD (page 249)
Rebuild NURBS Surfaces and Curves
REBUILDDEGREEV
Sets the degree in the V direction when rebuilding a NURBS surface.
IntegerType:
RegistrySaved in:
3Initial value:
Valid values are 2 to 11.
See also:
CVREBUILD (page 249)
Rebuild NURBS Surfaces and Curves
REBUILDOPTIONS
Controls deletion and trimming options when rebuilding a NURBS surface.
IntegerType:
RegistrySaved in:
1Initial value:
When you use CVREBUILD:Value
The original surface is not deleted and trimmed areas are not applied to
the rebuilt object.
0
The original surface is deleted and trimmed areas are not applied to the
rebuilt object.
1
R System Variables | 1457