2013

LWDEFAULT
Sets the value for the default lineweight.
EnumType:
RegistrySaved in:
25Initial value:
The default lineweight can be set to any valid lineweight value in hundredths
of millimeters, including: 0, 5, 9, 13, 15, 18, 20, 25, 30, 35, 40, 50, 53, 60, 70,
80, 90, 100, 106, 120, 140, 158, 200, and 211.
All values must be entered in hundredths of millimeters. (Multiply a value by
2540 to convert values from inches to hundredths of millimeters.)
See also:
Overview of Lineweights
LWDISPLAY
Controls whether the lineweights of objects are displayed.
IntegerType:
DrawingSaved in:
OFFInitial value:
This setting is controlled separately for model space and for all paper space
layouts.
Lineweights are not displayedOFF
Lineweights are displayedON
See also:
Display Lineweights
LWUNITS
Controls whether lineweight units are displayed in inches or millimeters.
1404 | Chapter 4 System Variables