2013

Bring to front. The hatch or fill is brought to the front of all other
objects.
2
Send behind boundary. The hatch or fill is sent behind the hatch’s
boundary objects.
3
Bring in front of boundary. The hatch or fill is brought in front of
the hatch’s boundary objects.
4
See also:
Set Property Overrides for Hatches and Fills
HPGAPTOL
Treats a set of objects that almost enclose an area as a closed hatch boundary.
RealType:
RegistrySaved in:
0.0000Initial value:
The default value, 0, specifies that the objects enclose the area, with no gaps.
Enter a value, in drawing units, from 0 to 5000 to set the maximum size of
gaps that can be ignored when the objects serve as a hatch boundary.
See also:
Specify Hatch and Fill Areas
HPINHERIT
Controls whether to inherit the hatch origin when using the Inherit Properties
option in HATCH and HATCHEDIT.
IntegerType:
DrawingSaved in:
0Initial value:
The hatch origin is taken from HPORIGIN0
1362 | Chapter 4 System Variables