2013

FRONTZ
Stores the front clipping plane offset from the target plane for the current
viewport, in drawing units.
(Read-only)
RealType:
DrawingSaved in:
0.0000Initial value:
The front clipping and front clip not at eye bitcodes in
VIEWMODE (page 1535)
are on. The FRONTZ value is the last front clipping plane value set current
with the DVIEW command. The distance of the front clipping plane from the
camera point is found by subtracting FRONTZ from the camera-to-target
distance.
See also:
Create a 3D Dynamic View (DVIEW)
FULLPLOTPATH
Controls whether the full path of the drawing file is sent to the plot spooler.
IntegerType:
RegistrySaved in:
1Initial value:
Sends the drawing file name only0
Sends the full path of the drawing file1
See also:
Print or Plot Drawings
F System Variables | 1339