2013

See also:
Create Meshes by Conversion
FACETERMINUGRID
Sets the minimum number of U grid lines for solids and surfaces that are
converted to mesh.
IntegerType:
User-settingsSaved in:
0Initial value:
This setting affects mesh that is converted from another object using the
MESHSMOOTH (page 640) command. (For a complete list of objects that can
be converted to mesh, see
Objects That Can Be Converted to Mesh (page 641).)
Permissible values range from 0 to 1023. Setting 0 (zero) turns off the setting.
The value of this system variable cannot exceed the value of FACETERMAX-
GRID
(page 1329)/FACETERMINVGRID (page 1330).
NOTE The value of this system variable reflects the value for objects with no
smoothness.
See also:
Create Meshes by Conversion
FACETERMINVGRID
Sets the minimum number of V grid lines for solids and surfaces that are
converted to mesh.
IntegerType:
User-settingsSaved in:
0Initial value:
This setting affects mesh that is converted from a 3D solid or surface object
using the
MESHSMOOTH (page 640) command. (For a complete list of objects
that can be converted to mesh, see
Objects That Can Be Converted to Mesh
(page 641).)
1330 | Chapter 4 System Variables