2013

DRAGVS
Sets the visual style that is displayed while creating 3D solid and mesh
primitives and extruded solids, surfaces, and meshes.
StringType:
DrawingSaved in:
""Initial value:
You can enter a period (.) to specify the current visual style. DRAGVS can only
be set to a visual style that is saved in the drawing.
DRAGVS has no effect when the current viewport's visual style is set to 2D
Wireframe.
The visual style specified for DRAGVS cannot be removed with the
PURGE
(page 861) command.
See also:
Create a Solid Box
DRAWORDERCTL
Controls the default display behavior of overlapping objects when they are
created or edited.
IntegerType:
DrawingSaved in:
3Initial value:
Turns off the default draw order of overlapping objects: after objects
are edited, regardless of their draw order, the objects are displayed
0
on top until a drawing is regenerated (REGEN) or reopened. This
setting also turns off draw order inheritance: new objects that are
created from another object using the commands listed below are
not assigned the draw order of the original object. Use this setting
to improve the speed of editing operations in large drawings. The
commands that are affected by inheritance are BREAK, FILLET,
HATCH, HATCHEDIT, EXPLODE, TRIM, JOIN, PEDIT, and OFFSET.
Turns on the default draw order of objects: after objects are edited,
they are automatically displayed according to the correct draw order.
1
D System Variables | 1311