2013

DIMGAP
Sets the distance around the dimension text when the dimension line breaks
to accommodate dimension text.
RealType:
DrawingSaved in:
0.0900 (imperial) or 0.6250 (metric)Initial value:
Also sets the gap between annotation and a hook line created with the LEADER
command. If you enter a negative value, DIMGAP places a box around the
dimension text.
DIMGAP is also used as the minimum length for pieces of the dimension line.
When the default position for the dimension text is calculated, text is
positioned inside the extension lines only if doing so breaks the dimension
lines into two segments at least as long as DIMGAP. Text placed above or
below the dimension line is moved inside only if there is room for the
arrowheads, dimension text, and a margin between them at least as large as
DIMGAP: 2 * (
DIMASZ (page 1260) + DIMGAP).
See also:
Control the Location of Dimension Text
DIMJOGANG
Determines the angle of the transverse segment of the dimension line in a
jogged radius dimension.
RealType:
DrawingSaved in:
45Initial value:
Jogged radius dimensions are often created when the center point is located
off the page. Valid settings range is 5 to 90.
See also:
Create Radial Dimensions
D System Variables | 1271