2013

CHAMFERD
Sets the chamfer angle when CHAMMODE is set to 1.
RealType:
DrawingSaved in:
0.0000Initial value:
See also:
Create Chamfers
CHAMMODE
Sets the input method for CHAMFER.
IntegerType:
Not-savedSaved in:
0Initial value:
Requires two chamfer distances0
Requires a chamfer length and an angle1
See also:
Create Chamfers
CIRCLERAD
Sets the default circle radius.
RealType:
Not-savedSaved in:
0.0000Initial value:
A zero indicates no default.
See also:
Draw Circles
1228 | Chapter 4 System Variables