2013

Pick Both Offsets
Temporarily closes the Array dialog box so that you can use the pointing
device to set the row and column spacing by specifying two diagonal corners
of a rectangle.
Polar Array
Creates an array by copying the selected objects around a specified center
point.
Center Point
Specifies the center point of the polar array. Enter coordinate values for X and
Y, or choose Pick Center Point to use the pointing device to specify the
location.
Pick Center Point
Temporarily closes the Array dialog box so that you can use the pointing
device to specify the center point in the drawing area.
Spacing Methods
Specifies the method and values used to position objects in the polar array.
Method
Sets the method used to position objects. This setting controls which of the
Method and Value fields are available for specifying values. For example, if
the method is Total Number of Items & Angle to Fill, the related fields are
available for specifying values; the Angle Between Items field is not available.
Total Number of Items
Sets the number of objects that appear in the resultant array. The default value
is 4.
Angle to Fill
Sets the size of the array by defining the included angle between the base
points of the first and last elements in the array. A positive value specifies
A Commands | 89