2013

Holding down the pick button at the midpoint of the window and moving
vertically to the top of the window zooms in to 100%. Conversely, holding
the pick button down at the midpoint of the window and moving vertically
to the bottom of the window zooms out by 100%.
When you reach the zoom-in limit, the plus sign in the cursor disappears,
indicating that you can no longer zoom in. When you reach the zoom-out
limit, the minus sign in the cursor disappears, indicating that you can no
longer zoom out.
When you release the pick button, zooming stops. You can release the pick
button, move the cursor to another location in the drawing, and then press
the pick button again and continue to zoom the display from that location.
To exit zooming, press Enter or Esc.
See also:
Pan or Zoom a View
Zoom Shortcut Menu
Shortcut menu allows you to switch between pan and different zoom options.
Summary
When the ZOOM command is active, you can exit ZOOM or switch to
PAN
(page 767) or 3DORBIT (page 40) using the options on the Zoom shortcut
menu. To access the Zoom shortcut menu, right-click in the drawing area
while ZOOM is active.
List of Options
The following options are displayed.
Exit Cancels ZOOM or PAN.
Pan Switches to PAN.
Zoom Switches to ZOOM in real time.
3D Orbit Switches to 3DORBIT.
Zoom Window Zooms to display an area specified by a rectangular window.
1192 | Chapter 2 Commands