2013

Path Displays and edits the path name associated with a particular DWG
reference. This option is useful if you change the location of or rename the
drawing file associated with the xref.
Unload Unloads the selected DWG references.
A marker is left in place of the xref so that it can be reloaded later.
Reload Reloads one or more DWG references. This option reloads and displays
the most recently saved version of that drawing.
If the program encounters an error while reloading, it ends XREF and undoes
the entire reloading sequence.
Overlay Displays the Enter Name of File to Overlay dialog box (a standard
file selection dialog box). If you reference a drawing that contains an overlaid
xref, the overlaid xref does not appear in the current drawing.
Unlike blocks and attached xrefs, overlaid xrefs cannot be nested. If another
person is currently editing the xref file, the program overlays the most recently
saved version.
If the xref you specify is not already overlaid, a new xref is crated, using the
name of the referenced file.
If FILEDIA is set to 0, the following prompt is displayed:
Enter Name of File to Overlay.
You can enter a tilde (~) to display a dialog box.
Attach Displays the Select Reference File dialog box. See
XATTACH (page 1172).
If you reference a drawing that contains an attached xref, the attached xref
appears in the current drawing. Like blocks, attached xrefs can be nested. If
another person is currently editing the xref file, the most recently saved version
is attached.
Specify Insertion Point
Specify a point or enter an option
Scale Sets the scale factor. All X and Y dimensions of the xref are multiplied
by the X and Y scale factors. The xref is rotated by the specified angle, using
the insertion point as the center of rotation.
X, Y, and Z Sets X, Y, and Z scale factors.
 X Scale Factor. Defines X, Y, and Z scale factors for the xref.
 Corner. Defines the X and Y scales at the same time, using the insertion
point and another point as the corners of a box, and then defines the Z
scale.
Rotate Sets the angle of insertion for the xref.
X Commands | 1187