2013

Deletes the selected objects from the current drawing after saving them as a
file.
Base Point
Specifies a base point for the block. The default value is 0,0,0.
Pick Point
Temporarily closes the dialog box so that you can specify an insertion base
point in the current drawing.
X
Specifies the X coordinate value for the base point.
Y
Specifies the Y coordinate value for the base point.
Z
Specifies the Z coordinate value for the base point.
Extended Options
Blocks Unit
Specifies the unit value to be used for automatic scaling when the new file is
inserted as a block in a drawing that uses different units. Select Unitless if you
do not want to automatically scale the drawing when you insert it. See
IN-
SUNITS
(page 1373).
See also:
Create Drawing Files for Use as Blocks
-WBLOCK
Saves selected objects or converts a block to a specified drawing file.
Summary
If FILEDIA (page 1334) is set to 1, entering -wblock at the Command prompt
displays a standard file selection dialog box in which to specify a name for
the new drawing file. If FILEDIA is set to 0, entering -wblock at the Command
prompt displays a prompt. The new drawing is saved in the file format that
is specified in Save As on the Open and Save tab in the Options dialog box.
W Commands | 1163