2013

Saves the coordinate system setting with the viewport (UCSVP (page 1529) system
variable). If this option is cleared, the viewport reflects the UCS of the viewport
that is current.
Update View to Plan When UCS Is Changed
Restores Plan view when the coordinate system in the viewport is changed.
(
UCSFOLLOW (page 1526) system variable)
See also:
Work with the User Coordinate System (UCS)
Orthographic UCS Depth Dialog Box
Specifies the depth for an orthographic UCS.
Access Methods
Shortcut menu: On the Orthographic tab, click Options  Depth.
List of Options
The following options are displayed.
<Name> Depth
Specifies the distance between the XY plane of the orthographic UCS and a
parallel plane that passes through the origin of the coordinate system.
Select New Origin
Temporarily closes the dialog box so that you can use the pointing device to
specify a new depth location in the drawing.
To reset the origin of the selected orthographic UCSs to the default location
(0,0,0), click Options  Reset.
See also:
Work with the User Coordinate System (UCS)
UCS Details Dialog Box
Displays information about the origin and axes of the selected UCS.
U Commands | 1121