2013

 Depth. Specifies the distance between the XY plane of the orthographic
UCS and a parallel plane that passes through the origin of the coordinate
system specified by the UCSBASE (page 1525) system variable. The parallel
plane of the UCSBASE coordinate system can be an XY, YZ, or XZ plane.
NOTE You can specify the depth or a new origin for the selected orthographic
UCS. See Depth option.
Relative To
Specifies the base coordinate system for defining the orthographic UCSs. By
default, WCS is the base coordinate system.
Whenever you change the Relative To setting, the origin of the selected
orthographic UCS is restored to its default position.
If you save an orthographic coordinate system in a drawing as part of a
viewport configuration, or if you select a setting in Relative To other than
World, the orthographic coordinate system name changes to UNNAMED to
distinguish it from the predefined orthographic coordinate system.
Options
Manages the selected UCS in the dialog box.
Set Current Restores the selected coordinate system.
Reset Restores the origin of the selected orthographic coordinate system. The
origin is restored to its default location (0,0,0) relative to the specified base
coordinate system.
Depth Specifies the distance between the XY plane of the orthographic UCS
and a parallel plane that passes through the origin of the coordinate system.
In the Orthographic UCS Depth dialog box, enter a value or choose the Select
New Origin button to use the pointing device to specify a new depth or a new
origin.
Details Displays the
UCS Details dialog box (page 1121), which displays UCS
coordinate data.
Settings Tab (UCS Dialog Box)
Displays and modifies UCS icon settings and UCS settings saved with a
viewport.
U Commands | 1119